logo_rtt
click-here-down

Remacleat red - overbelt magnets for mobile installations

Info

Step 1

Visit our dedicated RemaCleat Red Overbelt Magnets for Mobile Installations homepage for more information and to request your quotation click on the button on top of this page: Start Quotation.

form

Step 2

Fill out our basic online formular with only the essentials for us to provide an accurate quotation.

Mail

Step 3

Receive your quotation within 30 minutes by e-mail (for example on-the-spot while still at your customer). When requested between 08:00 and 15:00.

Next day delivery

Step 4

We can guarantee shipment of your RemaCleat Red Overbelt Magnets for Mobile Installations the next day if needed after receiving your (official) order.

Disclaimer:
When receiving your PO before 15:00. Monday till Thursday. Saturday/Sunday no scheduled shipments.
Shipment

Step 5

Shipment can be done towards your workshop or neutral directly towards your end-user customer.

Header_Speedline

Overbelt magnets
for mobile installations        

Key benefits

    • No detached cleats
      - due       to poor bonding of cleats
      - due       to weather / temperature & product influences
    • Less sensitive to smaller pulley diameters
      Limited width cleatbase (vs glued) results in less tension at the pulleys and less power consumption
    • Improved working life of the cleats
    • Environmentally friendly
      -       no use of industrial glues
    • Cost saving for end-user
Overbelt magnet

benefits Anti-magnetic mechanical fasteners

The method of making the conveyor belt for overbelt magnets endless is also an important aspect for the quality of the conveyor belt. What does it mean to choose anti-magnetic mechanical fasteners compared to an endless hot vulcanized joint?

The advantages of these fastener are:

  1. » Faster replaceable; this is because the tendon can be removed from the connector quickly and easily. This allows the conveyor belt to come off quickly. By just turning back the span of the drums, the new conveyor belt fits easily around the installation. When the new strap is on it, the tendon can go through the connector and the strap can be tensioned.
  2. » Less production loss, this is because the conveyor belt can be replaced quickly and the machine is stopped for a short time.

The main difference between a connector and a hot vulcanized joint is that you do not need to (partially) disassemble your overbelt magnet installation to fit your endless hot vulcanized conveyor belt. Especially on location without access to proper equipment.

It is very important to choose a completely anti-magnetic mechanical fastener. This is because otherwise the mechanical fastener can be attracted to the magnet and cause damage to the installation. Additionally small parts can “stick” to the mechnical fastener which can result in a broken mechanical fastener over a period of time due to wear and tear.